Navigation Menu+

Don’t Call a Plumber! Easy DIY Toilet Fixes

Posted on Sep 11, 2018 by in Home Improvement |

best plumbing in upland california

Let’s face it; it’s not always the best solution to call a plumber when something goes wrong with your toilet. Usually it will be something simple and easy to fix, so why spend all that money for someone to do a job that could cost you almost nothing and only take an hour or less? Here are some common problems that may go wrong with your toilet and some easy solutions to fix it.

Controlled flushing

If you happen to be living in an apartment in an urban location, chances are that you may have a flush meter toilet. These toilets have an adjusting screw that is able to control the amount of water that is released with every flush. The most common place that these screws will be is near the handle and some may be hidden under a decorative cover. To adjust it, you will need to hold the locknut steady with a wrench while you turn the screw in a clockwise motion to decrease the flow or turn in a counterclockwise motion to increase the flow.

Flushes are sluggish

If your toilet seems to have sluggish flushes that have very little power, you can fix this problem by checking the siphon hole that is near the center of the toilet bowl, it may be blocked with waste. Make sure you are wearing protective gloves and then twist a wire around in the hole to help remove any clogs that are present.

Leaking toilet

If your toilet seems to be leaking, you will want to test it by pouring enough food dye into the toilet tank to change the color of the water. If the water in the toilet bowl turns color, the problem will most likely be that the flush valve is leaking that is at the base of the tank. If any colored water seems to be collecting outside of the toilet, the problem will most likely be that the tank itself is leaking.

Toilet leaks under the bowl

If your toilet is leaking under the bowl, you can try to tighten the bolts that are on both sides of the toilet, and make sure not to over tighten the bolts. When you got to tighten the bolts and find that they are not loose, then you will want to remove the toilet and replace the wax sealing ring that is underneath it to fix the problem.

A trick commonly used

There is a trick that many people like to use in order to save water in their toilet tank. The trick is to put a brick in the tank to save water, but this isn’t a very affective trick because the brick will eventually disintegrate and it will cause the toilet to leak. Instead try using a water-filled plastic bottle to do the same job, and it will be safer for your toilet.

By doing these quick and easy DIY tricks, you can save a call to the plumber and save time and money at the same time. However if you are looking for the best plumber in Upland, CA , give InlandCalPlumbing.com a call. They service the entire Inland Empire region in California.

Pin It on Pinterest

Share This

Share this post with your friends!